Ubuntu 网络配置方法,auto网卡名称if
Ubuntu 网络配置方法,auto网卡名称if
修改网卡名称的传统命名方式:
将网卡的默认命名方式修改为ethX这种形式的名称
#1. 编辑配置文件:/etc/default/grub --->GRUB_CMDLINE_LINUX="net.ifnames=0"
#2. 生成配置文件:grub-mkconfig -o /boot/grub/grub.cfg或update-grub #centos里面是grub2
#3. 重启生效: reboot
#修改配置文件的值
tom@ubuntu1604:~$ cat /etc/default/grub |grep -v "^#"
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=2
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX="net.ifnames=0"
#生成配置文件
tom@ubuntu1604:~$ sudo grub-mkconfig -o /boot/grub/grub.cfg
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-4.4.0-142-generic
Found initrd image: /boot/initrd.img-4.4.0-142-generic
done
Ubuntu网卡配置
-
ubuntu1604网卡配置
-
ubuntu1804网卡配置
Ubuntu1604网卡配置
ubuntu1604 给网卡设置动态ip
编辑 /etc/network/interfaces这个文件配置。
auto 网卡名称
iface 网卡名称 inet dhcp
tom@ubuntu1604:~$ cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet dhcp
注意:NetworkManager工具是Ubuntu桌面版的GUI设置工具。
ubuntu1604 给网卡设置静态ip
tom@ubuntu1604:~$ cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
#auto eth0
#iface eth0 inet dhcp
auto eth0 #auto 表示系统启动(boot)时 自动加载eth0接口
iface eth0 inet static #接口etho 用作 静态ip地址
address 10.0.0.16 #ip地址
netmask 255.255.255.0 #子网掩码
gateway 10.0.0.2 #默认网关
dns-nameserver 180.76.76.76 #dns服务器地址
修改网络配置文件后生效:重启networking服务
tom@ubuntu1604:~$ sudo systemctl restart networking.service
或者
tom@ubuntu1604:~$ service networking restart
或者
sudo /etc/init.d/networking restart
tom@ubuntu1604:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c:29:20:9c:f0
inet addr:10.0.0.16 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe20:9cf0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:261 errors:0 dropped:0 overruns:0 frame:0
TX packets:129 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:239962 (239.9 KB) TX bytes:15405 (15.4 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:160 errors:0 dropped:0 overruns:0 frame:0
TX packets:160 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:11840 (11.8 KB) TX bytes:11840 (11.8 KB)
Ubuntu1804网卡配置
自 ubuntu 17.10 开始,Ubuntu 已放弃在 /etc/network/interfaces 里设置静态 IP 的办法了,即使配置也不会生效,而是改成 netplan 方式 。
配置写在 /etc/netplan/01-network-manager-all.yaml 或者类似名称的 yaml 文件里(此处请注意 yaml 的语法格式)
- 配置文件路径:/etc/netplan/XXX.yaml #配置文件的名字可以随意起
可以一个配置文件对应一个网卡,也可以一个配置文件对应多个网卡。
网卡配置文件的路径:/etc/netplan/xx.yaml
-
里面创建的文件必须以yaml结尾的文件。
-
一般不同级别的缩进都是两个空格,可以任意个空格
网卡配置文件的编写格式:
配置自动获取IP方法
network: #固定格式
version: 2 #版本号
renderer: networkd #固定格式
ethernets: #网络类型为以太网
eth0: #网卡名
dhcp4: yes #ipv4的dhcp自动获取
#键值对冒号后面要有空格 !
#yaml格式的文件缩进严格,同级别要保持同样的缩进(一般缩进两个空格,当然也可以是多个空格),错误的格式会导致网络配置文件不起作用。
配置静态ip
范例:
#vim /etc/netplan/01-netcfg.yaml
network: #固定格式
version: 2 #版本号
renderer: networkd
ethernets:
eth0: #网卡名
addresses: #配置多个地址就写多个ip地址
- 192.168.8.10/24 #需要配置的ip地址
- 10.0.0.10/8 #这里给这个网卡配置了两个ip地址
gateway4: 10.0.0.2 #ipv4的网关配置
nameservers: #如果要配置DNS就需要加这个
search: [xxx.com, fdsfa.org] #搜索域名,当访问地址写的不完整时,它会自动补全后缀(不需要就不写)
addresses: #添加的DNS服务器地址,最多可以添加三个
- 180.76.76.76
- 8.8.8.8
- 1.1.1.1
#addresses: [192.168.8.10/24,10.0.0.10/8] 这种写法也是可以的
#列表(python中的语法):中括号里面有多个元素,用逗号隔开
#列表的两种格式:
#格式一:所有元素卸载一个中括号里面以逗号隔开
#格式二:用横线开头,一个元素放一行。
范例
#配置192.168.26.128作为静态地址
tom@ubuntu1804-1:~$ cat /etc/netplan/01-netcfg.yaml #01-netcfg这个名称可以随便起,为了方便管理可以命名为网卡的名称
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
version: 2
renderer: networkd
ethernets:
ens33: #网卡名
addresses:
- 192.168.26.128/24 #ip地址
gateway4: 192.168.26.2 #网关
nameservers:
addresses: #配置的DNS服务器地址 最多可以配三个
- 192.168.26.129
评论暂时关闭