CentOS 7.x自定义开机启动设置,centos7.x但服务的配置和以往也
CentOS 7.x自定义开机启动设置,centos7.x但服务的配置和以往也
一:概述
CentOS 7继承了RHEL 7的新的特性,例如强大的systemctl,而systemctl的使用也使得以往系统服务的/etc/init.d/的启动脚本的方式就此改变,也大幅提高了系统服务的运行效率。但服务的配置和以往也发生了极大的不同。
CentOS 7的服务systemctl脚本存放在:/usr/lib/systemd/,有系统(system)和用户(user)之分,像需要开机不登陆就能运行的程序,还是存在系统服务里吧,即:/usr/lib/systemd/system目录下,并且每一个服务以 .service 结尾。
Centos 系统服务脚本目录:
/usr/lib/systemd
如需要开机没有登陆情况下就能运行的程序,存在系统服务(system)里,即:
/usr/lib/systemd/system
2. 开始配置
2.1 环境===>
1. 添加自启动服务为:uwsgi
2. 自启动脚本以经写好
3. 本人将开机自启动的脚本放在 /etc/init.d/目录下,并加执行权限
2.2 配置 ===>
每一个服务以.service结尾,一般会分为3部分:[Unit]、[Service]和[Install],我写的这个服务用于开机运行uwsgi项目,具体内容如下:
[root@tsingserver~]#cd/usr/lib/systemd/system
[root@tsingserversystem]#vimuwsgid.service
[Unit]
Description=uwsgid
After=network.target
[Service]
Type=forking
ExecStart=/etc/init.d/uwsgidstart
ExecReload=/etc/init.d/uwsgidrestart
ExecStop=/etc/init.d/uwsgidstop
PrivateTmp=true
[Install]
WantedBy=multi-user.target
服务脚本按照上面编写完成后,以 754 的权限保存在/usr/lib/systemd/system目录下
[root@tsingserversystem]#chmod754uwsgid.service
配置文件解释如下:
[Unit] ===> 服务的说明
Description:描述服务
After:描述服务类别
[Service] ===> 服务运行参数的设置
Type=forking:是后台运行的形式
ExecStart:为服务的具体运行命令
ExecReload:为重启命令
ExecStop:为停止命令
PrivateTmp=True:表示给服务分配独立的临时空间
注意:[Service]的启动、重启、停止命令全部要求使用绝对路径
[Install] ===> 服务安装的相关设置,可设置为多用户
--------------------------------------------------------------------------------
3. 设置开机自启动
systemctlenableuwsgid.service
4. 其他命令
以下以httpd服务为例
任务
旧指令
新指令
使某服务自动启动
chkconfig --level 3 httpd on
systemctl enable httpd.service
使某服务不自动启动
chkconfig --level 3 httpd off
systemctl disable httpd.service
检查服务状态
service httpd status
systemctl statushttpd.service
<== 服务详细信息
systemctl is-active httpd.service
<==仅显示是否 Active
显示所有已启动的服务
chkconfig --list
systemctl list-units --type=service
启动某服务
service httpd start
systemctl start httpd.service
停止某服务
service httpd stop
systemctl stop httpd.service
重启某服务
service httpd restart
systemctl restart httpd.service
启动nginx服务
systemctlstartnginx.service
设置开机自启动
systemctlenablenginx.service
停止开机自启动
systemctldisablenginx.service
查看服务当前状态
systemctlstatusnginx.service
重新启动服务
systemctlrestartnginx.service
查看所有已启动的服务
systemctllist-units--type=service
参考博文:http://blog.csdn.net/yuanguozhengjust/article/details/38019923
http://www.linuxboy.net/CentOS/config/2015/0507/5374.html
评论暂时关闭