Linux系统下用Frame Buffer来做摄像头编程

Linux系统下用Frame Buffer来做摄像头编程

在Linux下开发摄像头的程序,主要用的是video4linux来做的,界面用qt来实现,开始准备用frame buffer来直接写屏但是效果不怎么好,后来就用qt来做了,这样用起来效果还蛮好的,帧率也可以,可以上到30fps;运用v4l来编程主要掌握其 api,要提高帧率最重要的是用到内存映射,其实用qt和frame buffer的时候都要用到内存映射来做,只有这样才可以达到较高的帧率,不过要注意资源的利用问题.mmap后一定要munmap.对于frame buffer是很有意思的一个东西,特别是驱动的设计.

1.open device:
video_dev = open("\dev\video0",O_RDWR));
2.get the information of the video device
struct video_capability video_cap;
memset(&video_cap,0,sizeof(video_cap));
if(ioctl(video_dev,VIDIOCGCAP,&video_cap) == -1)
{
perror("Cann't get the information of the video device");
close(video_dev);
exit(1);
}
3.get the information of the channels
struct video_channel video_chan;
memset(&video_chan,0,sizeof(video_chan));
for(channel = 0;channel < video_cap.channels;channel++)
{
video_chan.channel = channel;
if(ioctl(video_dev,VIDIOCGCHAN,&video_chan) == -1)
{
perror("Cann't get the information of the channels");
close(video_dev);
exit(3);
}
if(video_chan.type == VIDEO_TYPE_TV)
{
#ifdef DEBUG
printf("NO.%d channel is %s,type is tv!\n",channel,video_chan.name);
#endif
}
if(video_chan.type == VIDEO_TYPE_CAMERA)
{
if(ioctl(video_dev,VIDIOCSCHAN,&video_chan) == -1)
{
perror("Cann't set the camera channel!");
close(video_dev);
exit(4);
}
}
}
4.get the capture attributes
struct video_picture video_pic;
memset(&video_pic,0,sizeof(video_pic));
if(ioctl(video_dev,VIDIOCGPICT,&video_pic) == -1)
{
perror("Cann't get the picture attributes of the device!");
close(video_dev);
exit(5);
}
5.set capture attributes
video_pic.palette = VIDEO_PALETTE_*****;//different camera has different palette
video_pic.brightness = 65535;
video_pic.colour = 0;
if(ioctl(video_dev,VIDIOCSPICT,&video_pic) == -1)
{
perror("Cann't set the picture attributs!");
close(video_dev);
exit(6);
}
6.mmap the device
struct video_mbuf mbuf;
unsigned char *frames;
memset(&mbuf,0,sizeof(mbuf));
if(ioctl(video_dev,VIDIOCGMBUF,&mbuf) == -1)
{
perror("Cann't get the buffer information of the video device!");
close(video_dev);
exit(7);
}
frames = (unsigned char *)::mmap(0,mbuf.size,PROT_READ|PROT_WRITE,MAP_SHARED,video_dev,0);
if(!frames || frames == (unsigned char *)(long)(-1))
{
perror("The device cann't be memory mapped!");
close(video_dev);
exit(8);
}
7.capture
if(ioctl(video_dev,VIDIOCMCAPTURE,&mmap) == -1)
{
perror("Capture failed!");
close(video_dev);
exit(9);
}

else
{
//display or save the picture file
}