Linux（Debian）下内外网网卡静态IP地址的设定

Linux（Debian）下内外网网卡静态IP地址的设定

 

单网卡的设置

vim /etc/network/interfaces

 

修改如下：

[plain] 

# This file describes the network interfaces available on your system  

# and how to activate them. For more information, see interfaces(5).  

    www.2cto.com  

# The loopback network interface  

auto lo  

iface lo inet loopback  

  

# The primary network interface  

allow-hotplug eth0  

# iface eth0 inet dhcp  

auto eth0  

iface eth0 inet static  

        address 192.168.1.108  

        netmask 255.255.255.0  

        gateway 192.168.1.1  

 

vim /etc/resolv.conf

末尾加入一行

[plain] 

nameserver 192.168.1.1  

 

重启网络服务并使更改生效

 

/etc/init.d/networking restart

  www.2cto.com  

内外网网卡的设置

interfaces文件

 

[plain] 

# This file describes the network interfaces available on your system  

# and how to activate them. For more information, see interfaces(5).  

  

# The loopback network interface  

auto lo  

iface lo inet loopback  

  

# The primary network interface  

auto eth0  

iface eth0 inet static  

        address 210.13.108.55  

        netmask 255.255.255.240  

        network 210.13.108.48  

        broadcast 210.13.108.63  

        #gateway 210.13.108.49  

        # dns-* options are implemented by the resolvconf package, if installed  

        dns-nameservers 10.9.7.1 210.22.70.3 210.22.84.3  

        dns-search internal.whyonly.com whyonly.com  

    www.2cto.com  

auto eth1  

iface eth1 inet static  

        address 10.9.7.68  

        netmask 255.255.255.0  

        broadcast 10.9.7.255  

        gateway 10.9.7.1  

        up /sbin/ip route add 10.9.0.0/16 via 10.9.7.1 src 10.9.7.68  

        down /sbin/ip route del 10.9.0.0/16 via 10.9.7.1 src 10.9.7.68  

 

resolv.conf 文件

[java] 

search internal.whyonly.com whyonly.com  

nameserver 10.9.7.1  

nameserver 210.22.70.3  

nameserver 210.22.84.3