Linux下修改MAC地址


Linux下修改MAC地址
方法一:

1.关闭网卡设备
ifconfig eth0 down
2.修改MAC地址
ifconfig eth0 hw ether MAC地址
3.重启网卡
ifconfig eth0 up

方法二:
以上方法一修改后linux重启后MAC又恢复为原来的,为了下次启动时修改后的MAC仍有效,我们可以修改文件file:/etc/rc.d /rc.sysinit(RedFlag Linux为这个文件,其他版本的linux应该不同)的内容,在该文件末尾加以下内容:
ifconfig eth0 down
ifconfig eth0 hw ether MAC地址
ifconfig eth0 up

方法三:
很简单的,只是在./etc/sysconfig/network-scripts/ifcfg-eth0中加入下面一句话:
MACADDR=00:AA:BB:CC:DD:EE
方法四:
Linux 下如何更改网卡MAC地址 
--------------------------------------------------------------------------------

简单的办法是在/etc/rc.d/rc.sysinit文件中加入那些命令:
ifconfig eth0 down
ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
ifconfig eth0 up
因为这个脚本运行在network之前,所以,MAC跟IP就是对应的
方法五:
Linux下的MAC地址更改
首先用命令关闭网卡设备。
/sbin/ifconfig eth0 down
然后就可以修改MAC地址了。
/sbin/ifconfig eth0 hw ether xxxxxxxxxxx
(其中xx是您要修改的地址)
最后重新启用网卡
/sbin/ifconfig eth0 up
网卡的MAC地址更改就完成了。
 
 
----------------------------------------------------------------------------------
修改/etc/sysconfig/network-scripts/ifcfg-eth0,将HWADDR:xxxxxxxxxxxx,增加MACADDR:XXXXXXXXXXX(伪装的mac地址)
本文出自 “网络设计” 博客

相关内容

    暂无相关文章