Lvs+keepalived实现负载均衡、故障剔除(DR模式)

文章由LinuxBoy分享于2019-03-24 10:03:57热评（485）

Lvs+keepalived实现负载均衡、故障剔除(DR模式)

http://antsw.blog.51cto.com/936097/214975 本文出自 “山捻子” 博客

Node1: 192.168.1.253
Node2: 192.168.1.254
VIP: 192.168.1.250

环境 centos5.2（我这里是用两台机实现的）
1、安装ipvsadm
yum -y install ipvsadm

2、安装keepalived
[root@node1 ~]# wget http://www.keepalived.org/software/keepalived-1.1.15.tar.gz
[root@node1 ~]# tar zxvf keepalived-1.1.15.tar.gz
[root@node1 ~]# cd keepalived-1.1.15
[root@node1 keepalived-1.1.15]# ./configure --prefix=/ --mandir=/usr/local/share/man/ --with-kernel-dir=/usr/src/kernels/2.6.18-92.el5-i686/
configure后会输入这结果为正确
Keepalived configuration
------------------------
Keepalived version       : 1.1.15
Compiler                 : gcc
Compiler flags           : -g -O2
Extra Lib                : -lpopt -lssl -lcrypto
Use IPVS Framework       : Yes    #支持lvs
IPVS sync daemon support : Yes
Use VRRP Framework       : Yes
Use LinkWatch            : No
Use Debug flags          : No

[root@node1 keepalived-1.1.15]# make && make install
到此，lvs+keepalived安装完成。但是还不能使用lvs功能，接下来以dr模式配置lvs+keepalived

3、[root@node1 ~]# cd /etc/keepalived/
[root@node1 keepalived]# vim keepalived.conf
! Configuration File for keepalived
global_defs {
   notification_email {
    shanswei@gmail.com
   }
   notification_email_from shanswei@gmail.com
   smtp_server 127.0.0.1
   smtp_connect_timeout 30
   router_id LVS_DEVEL
}

vrrp_instance VI_1 {
    state MASTER      ##主lvs设置成master
    interface eth0
    virtual_router_id 51
    priority 102     ##从lvs设置成 99
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
       192.168.1.250 ## 如多个vip，继续换行填写。
    }
}
virtual_server 192.168.1.250 80 {
    delay_loop 6
    lb_algo wlc
    lb_kind DR
    persistence_timeout 50
    protocol TCP

    real_server 192.168.1.253 80 {
        weight 3
        TCP_CHECK {
        connect_port 80
        connect_timeout 30
        }
    }
    real_server 192.168.1.254 80 {
        weight 1
        TCP_CHECK {
        connect_port 80
        connect_timeout 30
        }
    }

好了，keepalived配置完成了。
启动keepalived
[root@node1 ~]# /etc/init.d/keepalived start
如果要随系统启动，执行chkconfig --add keepalived
                                       chkconfig keepalived on

4、接着配置真实服务器，这里通过脚本来实现吧(这个脚本只在WEB机上执行，我现在是用两台机。服务器既充当lvs、也充当web机)
[root@node1 keepalived]# vim realserver
#!/bin/bash
#description : start realserver
VIP=192.168.1.250
/etc/rc.d/init.d/functions
case "$1" in
start)
echo " start LVS of REALServer"
/sbin/ifconfig lo:0 $VIP broadcast $VIP netmask 255.255.255.255 up
echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
;;
stop)
/sbin/ifconfig lo:0 down
echo "close LVS Directorserver"
echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
esac
[root@node1 keepalived]# chmod +x realserver
[root@node1 keepalived]# ./realserver start

5、启动keepalived (附启动日志)
[root@node1 ~]# /etc/init.d/keepalived start (主LVS)
Oct 15 13:59:36 vmtest Keepalived: Starting Keepalived v1.1.15 (10/15,2009)
Oct 15 13:59:36 vmtest Keepalived_healthcheckers: Using MII-BMSR NIC polling thread...
Oct 15 13:59:36 vmtest Keepalived_healthcheckers: Netlink reflector reports IP 192.168.1.253 added
Oct 15 13:59:36 vmtest Keepalived_healthcheckers: Netlink reflector reports IP 10.0.0.253 added
Oct 15 13:59:36 vmtest Keepalived_healthcheckers: Registering Kernel netlink reflector
Oct 15 13:59:36 vmtest Keepalived_healthcheckers: Registering Kernel netlink command channel
Oct 15 13:59:36 vmtest Keepalived_healthcheckers: Opening file /etc/keepalived/keepalived.conf.
Oct 15 13:59:36 vmtest Keepalived_healthcheckers: Configuration is using : 11891 Bytes
Oct 15 13:59:36 vmtest Keepalived_healthcheckers: Activating healtchecker for service [192.168.1.253:80]
Oct 15 13:59:36 vmtest Keepalived_healthcheckers: Activating healtchecker for service [192.168.1.254:80]
Oct 15 13:59:36 vmtest Keepalived: Starting Healthcheck child process, pid=28419
Oct 15 13:59:36 vmtest Keepalived_vrrp: Using MII-BMSR NIC polling thread...
Oct 15 13:59:36 vmtest Keepalived_vrrp: Netlink reflector reports IP 192.168.1.253 added
Oct 15 13:59:36 vmtest Keepalived: Starting VRRP child process, pid=28420
Oct 15 13:59:36 vmtest Keepalived_vrrp: Netlink reflector reports IP 10.0.0.253 added
Oct 15 13:59:36 vmtest Keepalived_vrrp: Registering Kernel netlink reflector
Oct 15 13:59:36 vmtest Keepalived_vrrp: Registering Kernel netlink command channel
Oct 15 13:59:36 vmtest Keepalived_vrrp: Registering gratutious ARP shared channel
Oct 15 13:59:36 vmtest Keepalived_vrrp: Opening file /etc/keepalived/keepalived.conf.
Oct 15 13:59:36 vmtest Keepalived_vrrp: Configuration is using : 36278 Bytes
Oct 15 13:59:36 vmtest Keepalived_vrrp: VRRP sockpool: [ifindex(2), proto(112), fd(8,9)]
Oct 15 13:59:37 vmtest Keepalived_vrrp: VRRP_Instance(VI_1) Transition to MASTER STATE
Oct 15 13:59:38 vmtest Keepalived_vrrp: VRRP_Instance(VI_1) Entering MASTER STATE
Oct 15 13:59:38 vmtest Keepalived_vrrp: VRRP_Instance(VI_1) setting protocol VIPs.
Oct 15 13:59:38 vmtest Keepalived_vrrp: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 192.168.1.250
Oct 15 13:59:38 vmtest Keepalived_healthcheckers: Netl

推荐文章：

Lvs+keepalived实现负载均衡、故障剔除(DR模式)