CentOS根分区扩容方法
CentOS根分区扩容方法
操作环境：
[root@bkjia ~]# uname -a
Linux bkjia 2.6.32-358.18.1.el6.x86_64#1 SMP Wed Aug 28 17:19:38 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
现状分析：
系统有两个硬盘，第一个硬盘107G,“/”分区空间当时分区时只给了7.7G过小，空间马上占完。现在系统有第二个硬盘sdb大小为16GB，希望把sdb的所有空间加入到“/”分区中，是其空间容量从7.7GB变成7.7GB+16GB（约2.4GB）。（当然如果这里只有一个硬盘sda,有很多空间尚未使用可以进行同样的操作）
操作步骤如下：
第一步、查看本机现有分区情况
[root@bkjia ~]# df -h
文件系统容量已用可用已用%% 挂载点
/dev/mapper/VolGroup-lv_root
7.7G 7.1G 155M 98% /
tmpfs 3.9G 296K 3.9G 1% /dev/shm
/dev/sda1 485M 64M 396M 14% /boot
/dev/sda3 83G 350M 79G 1% /media
第二步、查看本机的磁盘情况
[root@bkjia ~]# fdisk -l
Disk /dev/sda: 107.4 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x000dc0ad
Device Boot Start End Blocks Id System
/dev/sda1 * 1 64 512000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 64 2089 16264192 8e Linux LVM
/dev/sda3 2090 13054 88076362+ 83 Linux
Disk /dev/mapper/VolGroup-lv_root: 8325 MB,8325693440 bytes
255 heads, 63 sectors/track, 1012 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x00000000
Disk /dev/mapper/VolGroup-lv_swap: 8325 MB,8325693440 bytes
255 heads, 63 sectors/track, 1012 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x00000000
注意：此时还没有在EXSI5.0中添加第二块硬盘
[root@bkjia ~]#
第三步、添加第二块硬盘
查看此时系统磁盘情况
root@bkjia ~]# fdisk -l
Disk /dev/sda: 107.4 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x000dc0ad
Device Boot Start End Blocks Id System
/dev/sda1 * 1 64 512000 83 Linux
Partition 1 does not end on cylinderboundary.
/dev/sda2 64 2089 16264192 8e Linux LVM
/dev/sda3 2090 13054 88076362+ 83 Linux
Disk /dev/sdb: 17.2 GB, 17179869184 bytes
255 heads, 63 sectors/track, 2088 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x00000000
Disk /dev/mapper/VolGroup-lv_root: 8325 MB,8325693440 bytes
255 heads, 63 sectors/track, 1012 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x00000000
Disk /dev/mapper/VolGroup-lv_swap: 8325 MB,8325693440 bytes
255 heads, 63 sectors/track, 1012 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x00000000
可以看到我们新添加的硬盘sdb
[root@bkjia ~]#
第四步、对第二块硬盘sdb进行分区
[root@bkjia ~]# fdisk /dev/sdb
Device contains neither a valid DOSpartition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with diskidentifier 0xfa4abbdc.
Changes will remain in memory only, untilyou decide to write them.
After that, of course, the previous contentwon't be recoverable.
Warning: invalid flag 0x0000 of partitiontable 4 will be corrected by w(rite)
WARNING: DOS-compatible mode is deprecated.It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibilityflag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOSpartition table
p print the partition table
q quit without saving changes
s create a new empty Sundisklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (expertsonly)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 4
First cylinder (1-2088, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G}(1-2088, default 2088):
Using default value 2088
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
说明：上面操作对sdb硬盘进行了分区操作，设为sdb4分区了（当然上面建立的主分区可以为1-4中的任意一个，我这里选择的4）。
第五步、对新建立的sdb4分区进行格式
[root@bkjia ~]# mkfs.ext4 /dev/sdb4
mke2fs 1.41.12 (17-May-2010)
文件系统标签=
操作系统:Linux
块大小=4096 (log=2)
分块大小=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
1048576 inodes, 4192957 blocks
209647 blocks (5.00%) reserved for thesuper user
第一个数据块=0
Maximum filesystem blocks=4294967296
128 block groups
32768 blocks per group, 32768 fragments pergroup
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
正在写入inode表: 完成
Creating journal (32768 blocks): 完成
Writing superblocks and filesystemaccounting information: done完成
This filesystem will be automaticallychecked every 20 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
说明：将sdb4分区格式化为ext4格式，因为CentOS安装是系统的格式ext4，所以这里要注意一下。
第六步、格式后的sdb4分区添加为物理卷
[root@bkjia ~]# pvcreate /dev/sdb4
Physical volume "/dev/sdb4" successfully created
更多详情见请继续阅读下一页的精彩内容：
利用LVM增加根分区大小
扩展Fedora 16虚拟机的根分区磁盘容量
Linux根分区扩容
在安装红帽企业版Linux 5之后缩减根分区
Linux查看分区命令和根分区扩容方法
Ubuntu Linux移动根分区
Ubuntu 7.04根分区大小的改变
|
评论暂时关闭