ns2.34_Ubuntu安装记录

文章由LinuxBoy分享于2019-03-28 11:03:38热评（467）

ns2.34_Ubuntu安装记录

原先是在win_cygwin下安装的，还是比较顺，基本没出问题。最近VisualBox+Ubuntu玩玩看，准备在上面安装NS2，顺便学习一下Linux。

学习需要2.31，安装有问题，没仔细看出错信息，otcl有误，鲁莽认为版本有问题，下ns2.34，目前最新，09年。估计ns3风生水起，2停止release了。

转入正题。

$ wget http://nchc.dl.sourceforge.net/sourceforge/nsnam/ns-allinone-2.34.tar.gz
$ tar -xzvf ns-allinone-2.34.tar.gz
$ cd ns-allinone-2.34
$ sudo apt-get install build-essential autoconf automake libxmu-dev
$ ./install

安装同样是在进行中，OTCL出错，退出，原因未知（“otcl-1.13 make failed! Exiting …”不知其所以然，google之）
解决方法：
ns-allinone-2.34/ns-2.34中找到 Makefile.in，修改

CC = @CC@ 改为 CC = gcc-4.3
CPP = @CXX@ 改为 CPP = g++-4.3

OS中有gcc，g++ ？
$ sudo apt-get install g++-4.3
$ CC=gcc-4.3 CXX=g++-4.3 ./install

执行。。。。。。
中间没看清，./install 重新工作，安装结束，

对Linix机理还是不清楚，www.bkjia.com惭愧！

修给环境变量：

$ gedit ~/.bashrc
末尾添加：
# LD_LIBRARY_PATH
OTCL_LIB=/your/path/ns-allinone-2.34/otcl-1.13
NS2_LIB=/your/path/ns-allinone-2.34/lib
X11_LIB=/usr/X11R6/lib
USR_LOCAL_LIB=/usr/local/lib
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$OTCL_LIB:$NS2_LIB:$X11_LIB:$USR_LOCAL_LIB

# TCL_LIBRARY
TCL_LIB=/your/path/ns-allinone-2.34/tcl8.4.18/library
USR_LIB=/usr/lib
export TCL_LIBRARY=$TCL_LIB:$USR_LIB

# PATH
XGRAPH=/your/path/ns-allinone-2.34/bin:/your/path/ns-allinone-2.34/tcl8.4.18/unix:/your/path/ns-allinone-2.34/tk8.4.18/unix
NS=/your/path/ns-allinone-2.34/ns-2.34/
NAM=/your/path/ns-allinone-2.34/nam-1.14/
PATH=$PATH:$XGRAPH:$NS:$NAM
为使修改的环境变量立即生效，执行
$ source ~/.bashrc

至此ok

$ns

% 出现，证明一切彻底ok

试了一个例子通过。

转： eclipse调试ns程序
Eclipse

Open Eclipse
Set the workspace as the ns installation path( /home/username/ns-allinone-2.34 ) by selecting File -> Switch Workspace
Choose File -> New -> Project -> C++ Project
Select Project Type as Makefile Project -> Empty C++ Project.
Toolchains: Linux GCC
Enter Project Name as ns-2.34
Uncheck “Use default location” then browse to the directory NS-2 source directory ( …/ns-allione-2.34/ns-2.34 )
Select “Next” and “Finish.
From the workspace, Selecting the NS-2 Project and choosing Project -> Build All should not give Error.
Running the project must open the console with the NS-2 prompt, %
Setting Debug Configuration:

Select Run -> Debug Configurations
Choose C/C++ Application. Type in any name.
Under the Main tab, Choose the following:
Project as ns-2.34.
C/C++ Application as ns. (Search Project and Choose this)
Under the Debugger tab, choose GDB Debugger. Uncheck the “Stop on startup at” option.
Apply and Debug.

推荐文章：

ns2.34_Ubuntu安装记录