SuSE Linux 10.1下成功安装ATI驱动并开启XGL

SuSE Linux 10.1下成功安装ATI驱动并开启XGL

前段时间装了驱动进不到桌面，改回来之后再次尝试安装，可是那个安装说明实在是简单，我这个绝对新手照着做，每次都是失败。又找了一个介绍怎么启用XGL的，这个很详细，我弄成功了并且改了一下，发上来给大家参考一下。

P.S:可能是我的9550太不行了，系统提示说：Xgl已启用，但不能很好地与这张卡共用。要禁用 Xgl 并返回到 2D 桌面，请按下面的“禁用桌面效果”。这将使您注销并返回到登录屏幕。 不过好在学会了怎么开启XGL了。

1. 先将make、gcc、kernel-source、xgl、compiz全部安装好

2.到http://www.ati.com/support/driver.html 下载对应你系统架构驱动。

3.在终端执行命令。下面是我执行的命令：

lovemai.kuraki@Aurea:~> ./ati-driver-installer-8.35.5-x86.x86_64.run

Created directory fglrx-install.T11528

Verifying archive integrity... All good.

Uncompressing ATI Proprietary Linux Driver-8.35.5

==================================================

ATI Technologies Linux Driver Installer/Packager

==================================================

Detected configuration:

Architecture: i686 (32-bit)

X Server: X.Org 6.9.x

Removing temporary directory: fglrx-install.T11528

lovemai.kuraki@Aurea:~> su

口令：

Aurea:/home/lovemai.kuraki # ./ati-driver-installer-8.35.5-x86.x86_64.run

Created directory fglrx-install.A13503

Verifying archive integrity... All good.

Uncompressing ATI Proprietary Linux Driver-8.35.5

==================================================

ATI Technologies Linux Driver Installer/Packager

==================================================

Detected configuration:

Architecture: i686 (32-bit)

X Server: X.Org 6.9.x

Removing temporary directory: fglrx-install.A13503

Aurea:/home/lovemai.kuraki # sax2 -r -m 0=fglrx

SaX: initializing please wait...

SaX: your current configuration will not be read in

SaX: access to your display has been granted

SPP: prepare device [0] profile: FireGL

SPP: including prepared profile(s)...

SaX: startup

SaX: X-Server: :0.0 -> grant

SaX: using cache data...

Aurea:/home/lovemai.kuraki #

1 2 下一页

【内容导航】
第1页：SuSE Linux 10.1下成功安装ATI驱动并开启XGL	第2页：SuSE Linux 10.1下成功安装ATI驱动并开启XGL