fedora 7拨号的解决步骤

fedora 7拨号的解决步骤

我是这样解决的，在 /usr/sbin 目录下, 有 adsl-setup,adsl-connect,
现运行 adsl-setup, 一步步的照着提示做,如下:
Welcome to the ADSL client setup. First, I will run some checks on
your system to make sure the PPPoE client is installed properly...

The following DSL config was found on your system:

Device: Name:
ppp0 DSLppp0

Please enter the device if you want to configure the present DSL config
(default ppp0) or enter 'n' if you want to create a new one:

LOGIN NAME

Enter your Login Name (default xxxxxxxxxx):

INTERFACE

Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default eth0):

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
Enter the demand value (default no):

1 2 下一页

【内容导航】
第1页：fedora 7拨号的解决步骤	第2页：fedora 7拨号的解决步骤