Linux和qtopia下的矩阵键盘驱动程序
Linux和qtopia下的矩阵键盘驱动程序
基于s3c2440和linux，实现了3*4的矩阵键盘驱动。
功能：延时消抖，重复按键，多键齐按（？？）
更详细的说明文档：“基于S3C24440和嵌入式Linux的矩阵键盘设计”，电子技术，2008,45(5):21-23
/**********************************************************
* s3c2440-keyboard.c
*
* keyboard driver for S3C2440 based PDA
*
*
* History:2007/04/30
*
*
***********************************************************/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/miscdevice.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/poll.h>
#include <linux/spinlock.h>
#include <asm/irq.h>
#include <asm/arch/irq.h>
#include <asm/arch/irqs.h>
#include <asm/arch/clocks.h>
#include <asm/hardware.h>
#include <asm/arch/S3C2440.h>
#define DEVICE_NAME "s3c2440-kb" //键盘设备名
static int kbMajor = 0; //默认的主设备号
#define MAX_KB_BUF 10 //循环队列的尺寸
typedef struct {
unsigned int keyStatus;
int irq;
// int timeCount;
u_short buf[MAX_KB_BUF]; /* 循环队列*/
unsigned int head, tail; /* 循环队列的读写指针*/
spinlock_t lock; /*锁*/
} KB_DEV;
static KB_DEV kbdev;
#define KEY_UP 0 //按键弹起
#define KEY_DOWN 1 //按键按下
#define NO_KEY_DOWN 2 //没有键按下
#define EINT1_DOWN 0
#define EINT3_DOWN 1
#define EINT8_DOWN 2
#define NO_EINT_DOWN 3
/*循环队列操作*/
#define BUF_HEAD (kbdev.buf[kbdev.head])
#define BUF_TAIL (kbdev.buf[kbdev.tail])
#define INCBUF(x) if((++x)==MAX_KB_BUF) x=0
/*定时器设置*/
#define KB_TIMER_DELAY (HZ/50) /*HZ表示每秒产生的时钟滴答数,定时器超时为20ms*/
#define REPEAT_START_DELAY (HZ) /* 自动重复开始延时:1秒*/
#define REPEAT_DELAY (HZ/2) /*自动重复延时:0.5秒*/
static struct timer_list kb_timer;
static struct timer_list repeat_timer;
spinlock_t repeat_lock;
static int timeCount =1;
static int TIME_OUT =5;
/*键盘矩阵*/
static u_short keyboard_code_map[4][3]={
{1 , 2 , 3 },
{4 , 5 , 6 },
{7 , 8 , 9 },
{10, 11, 12}
}; //每个按键对应的键盘码
static u_short pre_keyboard_code = 0; //上次扫描得到的按键值
static u_short curr_keyboard_code = 0;//当前扫描得到的按键值
static u_short snap_keyboard_code[4][3]={
{0 , 0 , 0 },
{0 , 0 , 0 },
{0 , 0 , 0 },
{0, 0, 0}
}; //临时按键值
#define DETECTION_THROLD 3
static int requestIrq();
static int s3c2440_kb_release(struct inode *inode, struct file *filp);
/*----------------------------------------------------
* func: 初始化GPJCON寄存器,将GPJ9,GPJ10,GPJ11,GPJ12
* 配置成output管腿
*
------------------------------------------------------*/
static void init_gpjcon()
{
//GPJ9,GPJ10,GPJ11,GPJ12------>output
GPJCON &= 0xFC03FFFF;
GPJCON |= 0x01540000;
}
/*----------------------------------------------------
* func: 向GPJ9,GPJ10,GPJ11,GPJ12输出value
* param:
* value: 输出值
*
------------------------------------------------------*/
//
static inline void output_giop(int value ) //往所有行输出
{
value &= 0x0000000F;
value <<= 9;
GPJDAT &= 0xE1FF;
GPJDAT |= value;
udelay(2);
}
/*----------------------------------------------------
* func: 判断eint当前是否是低电平
* param:
* irq: 当前引发中断的eint的irq号
* return:
* EINT1_DOWN: eint1上是低电平
* EINT3_DOWN: eint3上是低电平
* EINT8_DOWN: eint8上是低电平
* NO_EINT_DOWN:eint上不是低电平
------------------------------------------------------*/
int get_eint_value(int irq)
{
u_int IOValue;
IOValue = GPFDAT ;
if( (irq == 1) && (( IOValue & 0x00000002)==0) )
{
return EINT1_DOWN;
}
if((irq ==3 ) && (( IOValue & 0x00000008)==0) )
{
return EINT3_DOWN;
}
IOValue = GPGDAT ;
if((irq ==36) && (( IOValue & 0x0000001)==0) )
{
return EINT8_DOWN;
}
return NO_EINT_DOWN;
}
/*----------------------------------------------------
* func: 扫描键盘,判断哪一个键被按下
* param:
* x: 得到按键的行号
* y: 得到按键的列号
* return:
* KEY_DOWN: 键盘上有键被按下
* NO_KEY_DOWN: 键盘上没有键被按下
------------------------------------------------------*/
static inline int scan_keyboard(int* x,int* y)
{
int matrix_row,matrix_col,matrix_col_status;
output_giop(0xF); //往所有行输出1
//判断按键在哪一行
matrix_row=matrix_col=-1;
output_giop(0xE);//在第1行上输出1，其余行输出0
matrix_col_status = get_eint_value(kbdev.irq);
if(matrix_col_status != NO_EINT_DOWN)
{
matrix_row = 0;
matrix_col = matrix_col_status;
goto scanend;
}
output_giop(0xD);//在第2行上输出1，其余行输出0
matrix_col_status = get_eint_value(kbdev.irq);
if(matrix_col_status != NO_EINT_DOWN)
{
matrix_row=1;
matrix_col = matrix_col_status;
goto scanend;
}
output_giop(0xB);//在第3行上输出1，其余行输出0
matrix_col_status =get_eint_value(kbdev.irq);
if(matrix_col_status != NO_EINT_DOWN)
{
matrix_row=2;
matrix_col = matrix_col_status;
goto scanend;
}
output_giop(0x7);//在第4行上输出1，其余行输出0
matrix_col_status =get_eint_value(kbdev.irq);
if(matrix_col_status != NO_EINT_DOWN)
{
matrix_row=3;
matrix_col = matrix_col_status;
goto scanend;
}
scanend:
output_giop(0);
if(matrix_row >=0 )
{
snap_keyboard_code[matrix_row][matrix_col_status]= snap_keyboard_code[matrix_row][matrix_col_status] + 1;
if(snap_keyboard_code[matrix_row][matrix_col]>=DETECTION_THROLD)
{
*x=matrix_row;
*y=matrix_col;
curr_keyboard_code = keyboard_code_map[matrix_row][matrix_col];
return KEY_DOWN;
}
}
return NO_KEY_DOWN;
}
/*----------------------------------------------------
* func: 判断本次按键是否与上次按键相同
* param:
*
* return:
* 0: 相同
* 1: 不同
------------------------------------------------------*/
static inline int key_changed()
{
return (pre_keyboard_code == curr_keyboard_code)? 0 : 1;
}
/*----------------------------------------------------
* func: 将按键对应的键盘码保存到循环队列中
* param:
* keyValue: 按键的对应的键盘码
* return:
*
------------------------------------------------------*/
static inline void save_key_to_queue(u_short keyValue)
{
if (kbdev.keyStatus == KEY_DOWN)
{
BUF_HEAD = keyValue;
INCBUF(kbdev.head);
//wake_up_interruptible(&(kbdev.wq));
}
}
/*----------------------------------------------------
* func: 重复按键定时器处理程���,如果一直按住某键,
则将该键的键盘码定时存到循环队列中
* param:
* data: 无参数
* return:
*
------------------------------------------------------*/
static inline void repeat_timer_handler(unsigned long data)
{
spin_lock_irq(&(repeat_lock));
if(kbdev.keyStatus ==KEY_DOWN)
{
repeat_timer.expires = jiffies + REPEAT_DELAY;//设置自动重复延时
add_timer(&repeat_timer);//将定时器加入队列
if(pre_keyboard_code != 0)
{
//printk("repeat save keyvalue\n %d",pre_keyboard_code);
save_key_to_queue(pre_keyboard_code);//将按键值存入循环队列
}
}
else//如果按键弹起
{
//del_timer(&repeat_timer);
// printk("del repeat timer\n");
}
spin_unlock_irq(&(repeat_lock));
}
/*----------------------------------------------------
* func: 使能中断
* param:
* return:
*
------------------------------------------------------*/
//使能中断
static inline void enableIrq()
{
//清除SRCPND寄存器中eint1 eint2 eint8相应位
SRCPND = 0x0000002A;
//使能中断
enable_irq(IRQ_EINT1);
enable_irq(IRQ_EINT3);
enable_irq(IRQ_EINT8);
}
/*----------------------------------------------------
* func: 键盘定时扫描程序,如果得到稳定键码,将键码存
* 入循环队列;如果没有,则延时20ms后继续扫描
* param:
* data: 无参数
* return:
*
------------------------------------------------------*/
static inline void kb_timer_handler(unsigned long data)
{
int x,y;
spin_lock_irq(&(kbdev.lock));
x = y = 0;
if(scan_keyboard(&x,&y) == KEY_DOWN)
{
// printk("snap_keyboard_code=%d, %d, %d, %d\n", snap_keyboard_code[0][1],snap_keyboard_code[1][1],snap_keyboard_code[2][1],snap_keyboard_code[3][1]);
kbdev.keyStatus =KEY_DOWN;
if(key_changed())
{
pre_keyboard_code = curr_keyboard_code;
save_key_to_queue(pre_keyboard_code);
//printk("KEY_DOWN:%d x=%d y =%d\n",timeCount,x,y);
//设置自动重复开始延时定时器
/*repeat_timer.expires = jiffies + REPEAT_START_DELAY;
add_timer(&repeat_timer);*/
}
timeCount=1;
memset(snap_keyboard_code,0,12*sizeof(u_short));
//curr_keyboard_code =0;
kb_timer.expires = jiffies + KB_TIMER_DELAY;
add_timer(&kb_timer);
}
else
{
//printk("snap_keyboard_code=%d, %d, %d, %d\n", snap_keyboard_code[3][0],snap_keyboard_code[3][1],snap_keyboard_code[3][2],snap_keyboard_code[3][3]);
kb_timer.expires = jiffies + KB_TIMER_DELAY;
add_timer(&kb_timer);
//printk("timeCount:%d\n",timeCount);
if (timeCount==TIME_OUT) //扫描5次后仍然没有得到稳定键值
{
//复位计数器
timeCount=1;
kbdev.keyStatus =KEY_UP;
//使能中断
enableIrq();
//关闭定时器
del_timer(&kb_timer);
del_timer(&repeat_timer);
//printk("enable irq \n\n\n");
curr_keyboard_code = 0;
pre_keyboard_code= 0 ;
memset(snap_keyboard_code,0,12*sizeof(u_short));
}
else
timeCount++;
}
spin_unlock_irq(&(kbdev.lock));
}
/*----------------------------------------------------
* func: 从循环队列中读取按键的键码
* param:
* return: 按键的键码
*
------------------------------------------------------*/
static inline int kbRead()
{
u_short keyvalue;
spin_lock_irq(&(kbdev.lock));
keyvalue = BUF_TAIL;
INCBUF(kbdev.tail );
spin_unlock_irq(&(tsdev.lock));
return keyvalue;
}
/*----------------------------------------------------
* func: 对应文件读的函数,如果循环队列中有键码,
则将键码拷贝到用户空间的buffer中
* param:
*
* return:
* 返回从循环队列中读取的键码的字节数
*
*
------------------------------------------------------*/
static ssize_t
S3C2440_kb_read(struct file *filp, char *buffer, size_t count, loff_t * ppos)
{
u_short keyvalue;
if(kbdev.head == kbdev.tail)
{
return 0;
}
else
{
keyvalue = kbRead();
count = sizeof(keyvalue);
/*将数据拷贝到用户空间*/
copy_to_user(buffer,&(keyvalue),count);
return count;
}
}
/*----------------------------------------------------
* func: 与打开文件对应的open函数,初始化全局变量和定
* 时器以及请求中断
* param:
*
*
* return:
*
------------------------------------------------------*/
static int S3C2440_kb_open(struct inode *inode, struct file *filp)
{
kbdev.keyStatus = KEY_UP;
kbdev.head=kbdev.tail = 0;
kbdev.lock = SPIN_LOCK_UNLOCKED;
repeat_lock = SPIN_LOCK_UNLOCKED;
output_giop(0);
//初始化定时器
init_timer(&kb_timer);
kb_timer.function = kb_timer_handler;
//初始化重复按键定时器
init_timer(&repeat_timer);
repeat_timer.function = repeat_timer_handler;
/*if(requestIrq() !=0)
return -1;*/
enableIrq();
MOD_INC_USE_COUNT;
return 0;
}
static struct file_operations kb_fops = {
owner: THIS_MODULE,
open: S3C2440_kb_open,
read: S3C2440_kb_read,
release: s3c2440_kb_release,
};
/*----------------------------------------------------
* func: 中断处理程序,关闭中断开启键盘扫描定时器
* param:
*
*
* return:
*
------------------------------------------------------*/
static void keyboard_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
spin_lock_irq(&kbdev.lock);
//禁止所有中断
disable_irq(IRQ_EINT1);
disable_irq(IRQ_EINT3);
disable_irq(IRQ_EINT8);
kbdev.irq = irq;
//printk("irq=%d\n",kbdev.irq);
//启动定时器
kb_timer.expires = jiffies + KB_TIMER_DELAY;
add_timer(&kb_timer);
repeat_timer.expires = jiffies + REPEAT_START_DELAY;
add_timer(&repeat_timer);
spin_unlock_irq(&kbdev.lock);
}
/*----------------------------------------------------
* func: 初始化eint中断相关寄存器,安装中断处理程序
* param:
*
*
* return:
*
------------------------------------------------------*/
static int requestIrq()
{
int ret;
/* Enable interrupt */
//==================================================
// irq: Linux中断号，与硬件中断号不同
// handle: 中断处理程序
// flag: SA_INTERRUPT指示这是个快速中断处理程序
// dev_id: 用于共享的中断信号线,通常设置成NULL
//===================================================
ret = set_external_irq(IRQ_EINT1,EXT_FALLING_EDGE,GPIO_PULLUP_DIS);
if(ret)
goto eint_failed ;
ret = request_irq(IRQ_EINT1, keyboard_interrupt, SA_INTERRUPT,
DEVICE_NAME, NULL);
if(ret)
goto eint1_failed;
ret = set_external_irq(IRQ_EINT8,EXT_FALLING_EDGE,GPIO_PULLUP_DIS); //EXT_LOWLEVEL
if(ret)
goto eint_failed;
ret = request_irq(IRQ_EINT8, keyboard_interrupt, SA_INTERRUPT,
DEVICE_NAME, NULL);
if(ret)
goto eint8_failed;
ret = set_external_irq(IRQ_EINT3,EXT_FALLING_EDGE,GPIO_PULLUP_DIS);
if(ret)
goto eint_failed;
ret = request_irq(IRQ_EINT3, keyboard_interrupt, SA_INTERRUPT,
DEVICE_NAME, NULL);
if(ret)
goto eint3_failed;
return 0;
eint3_failed:
free_irq(IRQ_EINT3, keyboard_interrupt);
eint8_failed:
free_irq(IRQ_EINT8, keyboard_interrupt);
eint1_failed:
free_irq(IRQ_EINT1, keyboard_interrupt);
eint_failed:
printk(DEVICE_NAME ": IRQ Requeset Error\n");
return ret;
}
static int s3c2440_kb_release(struct inode *inode, struct file *filp)
{
/*注销设备*/
// unregister_chrdev(kbMajor, DEVICE_NAME);
/*释放中断*/
/*
free_irq(IRQ_EINT1,NULL);
free_irq(IRQ_EINT8,NULL);
free_irq(IRQ_EINT3,NULL);
MOD_DEC_USE_COUNT;
*/
return 0;
}
/*----------------------------------------------------
* func: 初始化键盘驱动,注册字符设备
* param:
*
*
* return:
>=0 : 初始化键盘驱动成功
<0: 失败
*
------------------------------------------------------*/
static int __init s3c2440_kb_init(void)
{
int ret;
/*初始化管腿配置*/
init_gpjcon();
output_giop(0);
/*注册设备*/
ret = register_chrdev(99, DEVICE_NAME, &kb_fops);
if(ret < 0) {
printk(DEVICE_NAME " can't get major number\n");
return ret;
}
kbMajor = ret;
printk("%s: major number=99\n",DEVICE_NAME);
requestIrq();
//暂时禁止所有中断，等到open时再打开
disable_irq(IRQ_EINT1);
disable_irq(IRQ_EINT3);
disable_irq(IRQ_EINT8);
return 0;
}
/*----------------------------------------------------
* func: 注销字符设备,释放中断
* param:
*
*
* return:
*
------------------------------------------------------*/
static void __exit s3c2440_kb_exit(void)
{
/*注销设备*/
unregister_chrdev(kbMajor, DEVICE_NAME);
printk("exit\n");
/*释放中断*/
free_irq(IRQ_EINT1,NULL);
free_irq(IRQ_EINT8,NULL);
free_irq(IRQ_EINT3,NULL);
}
module_init(s3c2440_kb_init);
module_exit(s3c2440_kb_exit);
//EXPORT_SYMBOL(s3c2440_kb_init);
//EXPORT_SYMBOL(s3c2440_kb_exit);
如果将此驱动和qtopia程序结合起来，需要修改qt源代码的qkeyboard_qws.cpp文件，添加对矩阵键盘的支持
class QWSHPCButtonsHandler : public QWSKeyboardHandler
{
Q_OBJECT
public:
QWSHPCButtonsHandler();
virtual ~QWSHPCButtonsHandler();
bool isOpen() { return buttonFD > 0; }
private slots:
void readKeyboardData();
private:
QString terminalName;
int buttonFD;
struct termios newT, oldT;
QSocketNotifier *notifier;
};
QWSHPCButtonsHandler::QWSHPCButtonsHandler() : QWSKeyboardHandler()
{
#ifdef QT_QWS_HPC
terminalName = "/dev/keyboard";
buttonFD = -1;
notifier = 0;
if ((buttonFD = open(terminalName, O_RDONLY | O_NDELAY, 0)) < 0) {
qWarning("Cannot open %s\n", terminalName.latin1());
return;
}
notifier = new QSocketNotifier( buttonFD, QSocketNotifier::Read, this );
connect( notifier, SIGNAL(activated(int)),this,
SLOT(readKeyboardData()) );
#endif
}
QWSHPCButtonsHandler::~QWSHPCButtonsHandler()
{
#ifdef QT_QWS_HPC
if ( buttonFD > 0 ) {
::close( buttonFD );
buttonFD = -1;
}
#endif
}
void QWSHPCButtonsHandler::readKeyboardData()
{
#ifdef QT_QWS_HPC
//-----------port form ButtonDetect-begin-----------
int tempint,i;
unsigned short buffer[1];
tempint=0;
int current_press=-1;
do{
tempint=read(buttonFD,buffer,1);
if(tempint > 0 )
{
// printf("\nCurrent Press Buttom %d \n",buffer[0]);
current_press = (int)buffer[1];
goto set_hpckey;
}
}while(tempint >0);
//-----------port form ButtonDetect-end-------------
set_hpckey:
int k=(-1);
switch(current_press) {
case 3: k=Qt::Key_Up; break; //
case 11: k=Qt::Key_Down; break; //
case 8: k=Qt::Key_Left; break; //
case 6: k=Qt::Key_Right; break; //
case 7: k=Qt::Key_Enter; break; // Enter
case 4: k=Qt::Key_Escape; break; // Enter
default: k=(-1); break;
}
if ( k >= 0 )
{
qwsServer->processKeyEvent( 0, k, 0, 1, false );
}
#endif
}
评论暂时关闭