如何搭建Percona XtraDB Cluster集群

文章由LinuxBoy分享于2019-03-30 12:03:28热评（671）

如何搭建Percona XtraDB Cluster集群

一、环境准备

主机IP 主机名操作系统版本 PXC

192.168.244.146 node1 CentOS7.1 Percona-XtraDB-Cluster-56-5.6.30

192.168.244.147 node2 CentOS7.1 Percona-XtraDB-Cluster-56-5.6.30

192.168.244.148 node3 CentOS7.1 Percona-XtraDB-Cluster-56-5.6.30

关闭防火墙或者允许3306, 4444, 4567和4568四个端口的连接

关闭SElinux

二、下载PXC

安装PXC yum源

# yum install http://www.percona.com/downloads/percona-release/RedHat/0.1-3/percona-release-0.1-3.noarch.rpm

这样会在/etc/yum.repos.d下生成percona-release.repo文件

安装PXC

# yum install Percona-XtraDB-Cluster-56

最终下载下来的版本是Percona-XtraDB-Cluster-56-5.6.30

注意：三个节点上均要安装。

三、配置节点

配置节点一

修改node1的/etc/my.cnf

[mysqld]

datadir=/var/lib/mysql
user=mysql

# Path to Galera library
wsrep_provider=/usr/lib64/galera3/libgalera_smm.so

# Cluster connection URL contains the IPs of node#1, node#2 and node#3
wsrep_cluster_address=gcomm://192.168.244.146,192.168.244.147,192.168.244.148

# In order for Galera to work correctly binlog format should be ROW
binlog_format=ROW

# MyISAM storage engine has only experimental support
default_storage_engine=InnoDB

# This changes how InnoDB autoincrement locks are managed and is a requirement for Galera
innodb_autoinc_lock_mode=2

# Node #1 address
wsrep_node_address=192.168.244.146

# SST method
wsrep_sst_method=xtrabackup-v2

# Cluster name
wsrep_cluster_name=my_centos_cluster

# Authentication for SST method
wsrep_sst_auth="sstuser:s3cret"

启动node1

# systemctl start mysql@bootstrap.service

注意：这个是CentOS 7下的启动方式，如果是CentOS 6，则启动方式为 # /etc/init.d/mysql bootstrap-pxc

之所以采用bootstrap启动，其实是告诉数据库，这是第一个节点，不用进行数据的同步。

利用这种方式启动，相当于wsrep_cluster_address方式设置为gcomm://。

此时，可登录客户端查看数据库的状态

mysql> show status like 'wsrep%';

主要关注以下参数的状态

+------------------------------+--------------------------------------+
| Variable_name                | Value                                |
+------------------------------+--------------------------------------+
| wsrep_local_state_uuid       | 1fbb69e3-32a3-11e6-a571-aeaa962bae0c |
 ...
| wsrep_local_state            | 4   
| wsrep_local_state_comment    | Synced                               |
 ...
| wsrep_cluster_size           | 1
 ...
| wsrep_cluster_status         | Primary                              |
| wsrep_connected              | ON                                   |
 ...
| wsrep_ready                  | ON                                   |

在上面的配置文件中，有个wsrep_sst_auth参数。该参数是用于其它节点加入到该集群中，利用XtraBackup执行State Snapshot Transfer（类似于全量同步）的。

所以，接下来是授权

mysql> CREATE USER 'sstuser'@'localhost' IDENTIFIED BY 's3cret';
mysql> GRANT RELOAD, LOCK TABLES, REPLICATION CLIENT ON *.* TO 'sstuser'@'localhost';
mysql> FLUSH PRIVILEGES;

配置节点二

修改node2的/etc/my.cnf

[mysqld]

datadir=/var/lib/mysql
user=mysql

# Path to Galera library
wsrep_provider=/usr/lib64/galera3/libgalera_smm.so

# Cluster connection URL contains the IPs of node#1, node#2 and node#3
wsrep_cluster_address=gcomm://192.168.244.146,192.168.244.147,192.168.244.148

# In order for Galera to work correctly binlog format should be ROW
binlog_format=ROW

# MyISAM storage engine has only experimental support
default_storage_engine=InnoDB

# This changes how InnoDB autoincrement locks are managed and is a requirement for Galera
innodb_autoinc_lock_mode=2

# Node #2 address
wsrep_node_address=192.168.244.147

# SST method
wsrep_sst_method=xtrabackup-v2

# Cluster name
wsrep_cluster_name=my_centos_cluster

# Authentication for SST method
wsrep_sst_auth="sstuser:s3cret"

启动node2

# systemctl start mysql

如果是CentOS 6，则启动方式为 # /etc/init.d/mysql start

如果在启动的过程中出现问题，可查看mysql的错误日志，如果是RPM安装，默认是/var/lib/mysql/主机名.err

启动完毕后，也可通过mysql> show status like 'wsrep%';命令查看集群的信息。

配置节点三

修改node3的/etc/my.cnf

[mysqld]
datadir=/var/lib/mysql
user=mysql

# Path to Galera library
wsrep_provider=/usr/lib64/galera3/libgalera_smm.so

# Cluster connection URL contains the IPs of node#1, node#2 and node#3
wsrep_cluster_address=gcomm://192.168.244.146,192.168.244.147,192.168.244.148

# In order for Galera to work correctly binlog format should be ROW
binlog_format=ROW

# MyISAM storage engine has only experimental support
default_storage_engine=InnoDB

# This changes how InnoDB autoincrement locks are managed and is a requirement for Galera
innodb_autoinc_lock_mode=2

# Node #3 address
wsrep_node_address=192.168.244.148

# SST method
wsrep_sst_method=xtrabackup-v2

# Cluster name
wsrep_cluster_name=my_centos_cluster

# Authentication for SST method
wsrep_sst_auth="sstuser:s3cret"

启动node3

# systemctl start mysql

登录数据库，查看集群的状态

+------------------------------+--------------------------------------+
| Variable_name                | Value                                |
+------------------------------+--------------------------------------+
| wsrep_local_state_uuid       | 1fbb69e3-32a3-11e6-a571-aeaa962bae0c |
 ...
| wsrep_local_state            | 4   
| wsrep_local_state_comment    | Synced                               |
 ...
| wsrep_cluster_size           | 3
 ...
| wsrep_cluster_status         | Primary                              |
| wsrep_connected              | ON                                   |
 ...
| wsrep_ready                  | ON

通过wsrep_cluster_size可以看出集群有3个节点。

四、测试

下面来测试一把，在node3中创建一张表，并插入记录，看node1和node2中能否查询得到。

node3中创建测试表并插入记录

root@node3 > create table test.test(id int,description varchar(10));
Query OK, 0 rows affected (0.18 sec)

root@node3 > insert into test.test values(1,'hello,pxc');
Query OK, 1 row affected (0.01 sec)

node1和node2中查询

root@node1 > select * from test.test;
+------+-------------+
| id   | description |
+------+-------------+
|    1 | hello,pxc   |
+------+-------------+
1 row in set (0.00 sec)

root@node2 > select * from test.test;
+------+-------------+
| id   | description |
+------+-------------+
|    1 | hello,pxc   |
+------+-------------+
1 row in set (0.05 sec)

至此，Percona XtraDB Cluster搭建完毕~

总结：

1. 刚开始启动node2的时候，启动失败，错误日志中报如下信息：

2016-06-15 20:06:09 4937 [ERROR] WSREP: failed to open gcomm backend connection: 110: failed to reach primary view: 110 (Connection timed out)
         at gcomm/src/pc.cpp:connect():162
2016-06-15 20:06:09 4937 [ERROR] WSREP: gcs/src/gcs_core.cpp:gcs_core_open():208: Failed to open backend connection: -110 (Connection timed out)
2016-06-15 20:06:09 4937 [ERROR] WSREP: gcs/src/gcs.cpp:gcs_open():1387: Failed to open channel 'my_centos_cluster' at 'gcomm://192.168.244.146,192.168.244.147,192.168.244.148': -110 (Connection timed out)
2016-06-15 20:06:09 4937 [ERROR] WSREP: gcs connect failed: Connection timed out
2016-06-15 20:06:09 4937 [ERROR] WSREP: wsrep::connect(gcomm://192.168.244.146,192.168.244.147,192.168.244.148) failed: 7
2016-06-15 20:06:09 4937 [ERROR] Aborting

2016-06-15 20:27:03 5870 [ERROR] WSREP: Failed to read 'ready <addr>' from: wsrep_sst_xtrabackup-v2 --role 'joiner' --address '192.168.244.147' --datadir '/var/lib/mysql/' --defaults-file '/etc/my.cnf' --defaults-group-suffix '' --parent '5870'  ''
        Read: '(null)'
2016-06-15 20:27:03 5870 [ERROR] WSREP: Process completed with error: wsrep_sst_xtrabackup-v2 --role 'joiner' --address '192.168.244.147' --datadir '/var/lib/mysql/' --defaults-file '/etc/my.cnf' --defaults-group-suffix '' --parent '5870'  '' : 2 (No such file or directory)
2016-06-15 20:27:03 5870 [ERROR] WSREP: Failed to prepare for 'xtrabackup-v2' SST. Unrecoverable.
2016-06-15 20:27:03 5870 [ERROR] Aborting

特别是下面的报错信息，根据https://mariadb.com/kb/en/mariadb/problem-with-the-galera-wsrep_sst_method-xtrabackup-v2/的解决思路，还以为是socat的版本太低。

后来才发现，是SElinux没有关闭。。。

另外，在节点加入集群的过程中，如果报有关xtrabackup-v2的错误，不妨先将wsrep_sst_method的方式设置为rsync或者mysqldump，看能否成功。

2. 以systemctl start mysql@bootstrap.service启动的节点，必须以systemctl stop mysql@bootstrap.service关闭，如果以systemctl stop mysql关闭，则没效果。

参考文档：

2. PXC官方文档

3. http://galeracluster.com/documentation-webpages/

Percona XtraDB Cluster 的详细介绍：请点这里
Percona XtraDB Cluster 的下载地址：请点这里

本文永久更新链接地址：

推荐文章：

Percona XtraDB Cluster 如何在一台服务器上安装两
移动基于Percona XTRADB Cluster的大数据解决方案

如何搭建Percona XtraDB Cluster集群