pcDuino + BusyBox 成功搭建最小Linux系统

文章由LinuxBoy分享于2019-03-31 12:03:50热评（122）

pcDuino + BusyBox 成功搭建最小Linux系统

经过一周的尝试，我的pcduino mini linux系统终于跑起来了。启动界面如下：

U-Boot 2012.10 (Apr 19 2013 - 18:46:44) Allwinner Technology

CPU: SUNXI Family
Board: pcDuino
I2C: ready
DRAM: 1 GiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
reading uEnv.txt

144 bytes read
Loaded environment from uEnv.txt
reading boot.scr

289 bytes read
Jumping to boot.scr
## Executing script at 44000000
Wrong image format for "source" command
reading script.bin

44900 bytes read
reading uImage

4693132 bytes read
## Booting kernel from Legacy Image at 48000000 ...
Image Name: Linux-3.0.62
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4693068 Bytes = 4.5 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

<6>Initializing cgroup subsys cpuset
<5>Linux version 3.0.62 (bkjia@bkjia) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #1 PREEMPT Sat Apr 20 18:32:39 CST 2013
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun4i
<6>Memory cut off:
<6> MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
<4>Ignoring unrecognised tag 0x00000000
<6>Memory Reserved:
<6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
<6> VE : 0x44000000 - 0x48ffffff ( 80 MB)
<6> G2D : 0x49000000 - 0x49ffffff ( 16 MB)
<6> LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
Memory policy: ECC disabled, Data cache writeback
<6>chip-id: A10 (AW1623 revision C)
<7>On node 0 totalpages: 245760
<7>free_area_init_node: node 0, pgdat c0887ea0, node_mem_map c094e000
<7> Normal zone: 1280 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 146176 pages, LIFO batch:31
<7> HighMem zone: 768 pages used for memmap
<7> HighMem zone: 97536 pages, LIFO batch:31
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
<5>Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
<6>PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 448MB 512MB = 960MB total
<5>Memory: 833852k/833852k available, 149188k reserved, 393216K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)

........//太长了，省略若干

<6>mmc0: new high speed SD card at address 1234
[ 4.140000] mmc0: new high speed SD card at address 1234
<6>mmcblk0: mmc0:1234 SA01G 942 MiB
[ 4.160000] mmcblk0: mmc0:1234 SA01G 942 MiB
<6> mmcblk0: p1 p2
[ 4.170000] mmcblk0: p1 p2
<6>Console: switching to colour frame buffer device 160x45
[ 4.290000] Console: switching to colour frame buffer device 160x45
<4>regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
[ 4.330000] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
<4>regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
[ 4.350000] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
<4>regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
[ 4.360000] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
<4>regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
[ 4.380000] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
<4>regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
[ 4.390000] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
<4>regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
[ 4.410000] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
<6>sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
[ 4.420000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
<6>sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:10
[ 4.430000] sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:10
<6>sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:10 UTC (1262304010)
[ 4.440000] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:10 UTC (1262304010)
<3>EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
[ 4.460000] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
<3>EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
[ 4.480000] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
<6>EXT4-fs (mmcblk0p2): recovery complete
[ 5.840000] EXT4-fs (mmcblk0p2): recovery complete
<6>EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.060000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
<6>VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 6.080000] VFS: Mounted root (ext4 filesystem) on device 179:2.
<6>devtmpfs: mounted
[ 6.090000] devtmpfs: mounted
<6>Freeing init memory: 164K
[ 6.090000] Freeing init memory: 164K
mount: mounting devpts on /dev/pts failed: No such file or directory
mount: mounting /dev/mmcblk0p1 on /boot failed: No such file or directory

Please press Enter to activate this console.

Processing /etc/profile... Done

/ # ls
bin home lost+found run tmp
dev lib mnt sbin usr
etc linuxrc proc sys var
/ # ifconfig eth0
eth0 Link encap:Ethernet HWaddr 12:5B:BD:7D:C4:75
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:55 Base address:0x8000

/ # ifconfig eth0 172.16.1.133
<4>wemac wemac.0: WARNING: no IRQ resource flags set.
[ 2360.950000] wemac wemac.0: WARNING: no IRQ resource flags set.
<6>wemac wemac.0: eth0: link down
[ 2361.060000] wemac wemac.0: eth0: link down
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2361.070000] ADDRCONF(NETDEV_UP): eth0: link is not ready
/ #

详细移植过程见linux移植。花了不少时间啊，这是移植心得。见

pcduino linux移植期间遇到了不少问题，总结如下：

1.pkg-config可以解决明明在自己机器上编译好好的，在别人电脑上编译就不行问题,它能为已安装的库时提供统一接口。了解pkg-config解决Package libusb-1.0 was not found in the pkg-config search path

2.用busybox制作文件系统时，要注意文件的属性。包括动态链接、执行权限等。通过sudo cp -pR file1 file2,保留文件属性，否则系统跑步起来。

3.Ubuntu下烧写tf卡命令，这里容易出问题，发现杂牌子的tf卡就不行，一卡了一段时间，最后果断Kingstorm

4.Kernel panic - not syncing: No init found. Try passing init= option to kernel,这个问题说了找不到init，而我设置init=/sbin/init，显然没问题。原因何在呢？

www.bkjia.com @ www.bkjia.com :~/Si/A10/pcduino/rootfs$ ls sbin/ -l

lrwxrwxrwx 1 bkjia bkjia 14 2013-04-28 21:16 init -> ../bin/busybox

www.bkjia.com @ www.bkjia.com :~/Si/A10/pcduino/rootfs$ file linuxrc
linuxrc: symbolic link to `bin/busybox'

pcDuino + BusyBox 成功搭建最小Linux系统