不同网段的终端相互通信
不同网段的终端相互通信
一、示意图
路由器端口
3) conf(igure) t(erminal) --有“特权模式”进入“全局模式”。
4) int f0/0 --进入接口,注意交叉线端口名称。
5) ip add 192.168.0.1 255.255.255.0 --配置IP及掩码。
6) no shut --启动路由器。
7) 完成! --退出全局配置模式/特权模式
评论暂时关闭